Poltava, lane. Perspective, 1
+38 (066) 111 53 71
+38 (098) 314 00 12
supp.inkoprom@gmail.com

INKOPROM

ex-Nestandart2000

Mounted Straw Dispenser Module

Designed for the destruction and distribution of baled phytomass in the room as bedding material, for mulching soil, or shelter of vegetable stores.

Flowing dlinnostebelnye phytomass "Kamysherezka"

Designed to grind sunflower stalks, corn and cane diameter to 20 mm., in the preparation of feed, bedding material or alternative fuel.

The strengthened hammer crusher "Shcheporez"

This product is intended for regrinding dry, pre-ground phytomass, husks of seeds, wood chips and crops, in the preparation of feed, bedding material, or manufacture of fuel briquettes and pellets.

Universal Farmer Chopper

Designed for grinding dry phytomass, and grains in the preparation of feed, bedding material, or manufacture of fuel briquettes and pellets.

Universal household shredder-mixer "Micro"

Designed for grinding dry, or wet (dried) phytomass, grain in the preparation of feed, bedding material, or manufacture of fuel briquettes and pellets.

Wood Chipper Pinocchio

This product is intended for chopping dry wood. (bastard), branches, to diameter 80 mm., in the manufacture of fuel briquettes and pellets.

Household Waste Disposer

Designed for an environmentally friendly method of processing solid waste and other industrial waste by micro-grinding, as well as for grinding, heat treatment and sterilization of medical waste at risk of infection.

Three-roll machine for cutting pipes of heat exchangers radiators

Designed for cutting waste tubes radiators heat exchangers with aluminum radiator (screen) and steel, brass or copper core. Cutting is made into two parts and the core in series, three pairs of rolls.

Roller rolling machine

Designed for bending along the radius of the profile metal, pipes to 60 mm., as well as, channel to no 6,5.

Corn cobs

Designed for grinding cereals , corn cobs for cooking feed, as well as the manufacture of fuel briquettes and pellets.

The machine for preparation of wood "Łuparka"

It is designed to prepare the wood material when loaded into solid fuel boilers, or furnace.

Feed Granulator

This product is intended for granulation of all types of compound feeds., soybean waste, as well as waste products from agricultural enterprises, subject to the requirements for fraction and moisture level of processed raw materials.

Armor Removal Machine

Designed to remove wound steel armor or pull steel wires from the so-called "air wires".

Hydraulic briquetting press

Designed to produce bulk bales of certain in portions. This product allows you to automatically press wood shavings, hay, straw, rags, cotton, remove and pack bales to simplify storage, transportation and processing.

Alligator straw cutter "Crocodile" (tow hitch)

This product is intended for grinding rolls. (cubes) straw of any type and humidity up to 1500 mm. or in bulk, when preparing feed or bedding material.

Straw chopper (tow hitch)

Designed for grinding dry baled straw with a diameter of up to 1400 mm., when using it as bedding material, or cooking feed, when growing mushrooms, and insulation of open vegetable stores.

Set of equipment for cutting electric motors

This equipment is intended for the disposal of electric motors by splitting the motor housing, his stator, followed by extraction of copper windings.

Hammer crusher

This product is intended for regrinding dry, pre-ground phytomass, husks of seeds, wood chips and crops, in the preparation of feed, bedding material, or manufacture of fuel briquettes and pellets.

Vertical round bale phytomass grinder “Carousel”

Designed for grinding rolls (cubes), dry phytomass of any type, vine, for cooking feed, bedding material and manufacture of fuel briquettes and pellets. The chopper can also be used for the production of mushrooms, at thermal power plants, power plants, in livestock. The chopper is optionally equipped with a cyclone unloader and a feed conveyor..

Universal shredder dry, тюкованной фитомассы «SHREDDER»

Designed for grinding cylindrical and rectangular bales of dry phytomass of any section when preparing feed, bedding material and manufacture of fuel briquettes and pellets.

Alligator Straw Cutter Crocodile

This product is intended for grinding rolls. (cubes) straw of any type and moisture diameter 1200 or 1800 mm or in bulk, in the preparation of feed, bedding material, and manufacture of fuel briquettes and pellets.

Three-knife machine (Stripper) for cutting cable diameters from 20 to 120 mm.

Designed for cutting armored waste, oil-filled cable with lead or aluminum cable diameter 20-120 mm. The machine cuts the cable with three circular knives into three flat parts. Armor, isolation or screen diverge in the form of a flower, leaving the central veins free.

Rolling machine for cutting cable with a diameter of up to 25 mm.

Designed to release the inner core of the cable with a cross section up to 25 mm., in the recycling of cable and wire fittings.

Hydraulic briquetting press

Designed for briquetting waste sheet material, PET bottles and waste paper for recycling.

Alligator household straw chopper

Designed for grinding dry and wet (dried), phytomass, corn stalks, reeds, sunflower, wet leaves, needles, in the preparation of feed, or bedding material.

Equipment manufactured by individual one-time orders

Customized equipment manufacturing, production of drawings and technical documentation.