Armor Removal Machine
Designed to remove wound steel armor or pull steel wires from the so-called “air wires”. The cable must be pre-cut into pieces 1,5 – 2 m., (for unwinding) and to pieces 5-10 m., (for drawing out cores). After removing the armor, the cable can be cut further using a conventional stripper S1-MB.120, or rollers S1-2MB.25. After drawing out the steel cores, the remaining aluminum strands can be pressed into a cube using the S1-PBK.N press.05.
Specifications
1.Performance, kg / hour, (determined by removing armor on the cable 100 mm.) | 1000 |
2. Maximum diameter of drawn core, mm. | 8 |
3. Maximum diameter of armored cable, mm. | 160 |
4. installed capacity, kW. | 1,5 |
5. Pulling force, n*m. | 700 |
6. dimensions, mm., no more |
|
– length | 1090 |
– width | 1000 |
– height | 1270 |
7. Weight , kg. no more | 300 |