Set of equipment for cutting electric motors
This equipment is intended for the disposal of electric motors by splitting the motor housing, his stator, followed by extraction of copper windings.
Specifications
1. Maximum size of the engine to be cut, (mm.) | 200 |
2. Drive motor speed, rev / min. | 1450 |
3. Installed pump | NS 25 |
4. Network pressure, (there is) | 120 – 160 |
5. installed capacity, kW | 11 |
6. Oil consumption, l/min.(at system pressure 160 Mpa.) | 54,2 |
7. Amount of oil in the oil tank, l. (with filled system) | 80 |
8. dimensions, mm., no more: |
|
– length | 2110 |
– width | 1290 |
– height | 2000 |
9. Weight, kg. no more | 2000 |